Fuchs ODS settings

i have a fuchs ods 100.  i use a fuchs 2x12 open back with fats-1 speakers made by eminence--it's 4 ohms at 600 watts.  i also use an avatar 2x12 with eminence g12 & v12--100 watts at 8 ohms.  depends on the room & my mood as to which cab i use.  settings are:  volume 1 o'clock    treb noon     mid 2 o'clock     bass noon    drive 2:30     drive output  between 11 o'clock to 1--depends on venue--the master can be at 3 o'clock to 3:30    accent 1:15   reverb 8 o'clock   switch in rock position   i don't add bottom or bright--i use the guitar tone control as needed--especially when i use fuzz.  i run all my effects thru the front--never have used the loop live.  i will toss in a lovepedal black kanji 9 as another drive tone--i use it on the clean channel.  i use les pauls.  especially the elitist epiphones--left them stock--they are very nice.  i favor a prs santana md for the most part now.  i may turn the accent back to 11 o'clock sometimes--but usually leave it alone & use the tone controls on the guitar.  i think the fuchs delivers.  i've stayed with eminence because people have commented on the tone i get--so that does it for me.  i've thought about the hellatones from avatar.  i don't need another cab--but you know how it goes.  i'm pretty pleased with the sounds i get.  i have vibes, trem, phase, leslie, wah, roctavious, fuzz, & the kanji for effects.  i use the fulltone 9v adapters--they perform better consistently than other adapters.  andy has been great in building & maintaining the amp.  only needed him once when a ground came loose.  other than that, the amp sings.  it was set up standard from fuchs.  andy has a great ear--& can play the guitar brilliantly.  he set it up as if he were to play it.  in fact, he does--from what i know, he plays everything before it leaves the factory.  i hate turning it off, but you have to eat & go to work.